• image

    EVO-II

ANALOG EVOLUTION STEP-UP TRANSFORMER EVO-II

EVO-II is designed to be used with any low or medium output MC phono cartridges with self (internal) impedance ranging from 1 to 100 ohms. A transformer is placed inside of a copper lined enclosure for extra protection from hum and noise. The enclosure and transformer are protected from vibration inside and outside. The inside of enclosure transformer is “floating” in layers of low density polyurethane foam and outside has two strategically placed O-rings.
The EVO-II does not require additional phono stage interconnect cables to be used between the output of the cartridge and the input of the transformer. Because of its small size and weight, the EVO-II may be placed in the shortest proximity to the cartridge output connectors – only 5 inches away!
The EVO-II is shipped to our customers with a complete resistor “loaded” secondary winding of the transformer using only the best possible reference grade Vishay resistors. Our EVO–II TRANSFORMERS are fully “broken-in”, demagnetized prior to shipping and do not require additional adjustments.
One set of EVO-II consists of two independent color coded enclosures - red for right channel and black for left.

TECHNICAL SPECIFICATION
1. Recommended for MC cartridges with :
       Internal (self) impedance                                                   from 1 to 100 ohms.
       Output signal                                                                     from 0.2mV to 0.8mV
2. Ratio                                                                                     1 : 10 (20 dB)
3. Total harmonic distortion at 20 Hz ( 6 ohm source)                    0.05%
4. Frequency response ( 8 ohm source 100K ohm load)              +/- 0.5dB  5 Hz to 60 kHz
5. Winding material                                                                                 OCC copper wire
6. Input connectors:
         Furutech male RCA gold plated                                        FP - 900 (G)
7. Size:
         Transformer diameter                                                         2 inches (5 centimeters)
         Transformer length                                                             4 inches (10 centimeters)
           Total length with input cable                                             9 inches (23 centimeters)
8. Weight                                                                                     8 oz.       ( 240 gram)                               

 

 

 

          Model

                          Connectors

    Price per pair  $CDN

           input

         output

          ET201

           RCA**

           RCA*

                  899.00

RCA* - Furutech male gold plated    - FP-101 (G) 
RCA   - Furutech female gold plated - FP-900 (G)